Simple, reliable flow control
Applications involving the flow of water demand extreme reliability and low energy consumption. Control Techniques’ F600 drive, part of the newly introduced Specialist series of industry-specific drive technologies, builds on our company’s five decades of drives expertise, delivering precise, dependable flow control.
Everything you need is baked into the drive itself. The F600 packs all of the features you’ll need, presented using terminology you’ll understand. This isn’t a generic drive with pump features tacked on; it’s a dedicated, specialist pump drive, designed from the ground up to deliver the reliability and efficiency you need.
The perfect mix of application-specific features developed into a single solution
|
Speaks your language
The F600 drive is tuned to suit your every need, optimized for minimal setup time yet sacrificing none of the flexibility. Whatever the challenge, our dedicated approach to clear parameter naming and structuring ensures we not only have the answers, but in a format you’ll understand.
|
|
Energy savings, unlocking the potential
On average, 85% of a pump’s life-cycle cost is attributed to its energy consumption, therefore, optimizing the energy usage can mean a significant reduction in the total cost of ownership. The F600 drive thrives on delivering more efficient ways of operating your variable torque application. You’ll see the benefits in reduced running costs and lower energy requirements. |
|
Total control
The F600 can also control the most efficient motors available, meeting IE5 efficiency levels, such as the Nidec Leroy Somer Dyneo+ hybrid permanent-magnet motor. With all of this combined, the F600 is your best choice to save you money every day.
|
|
Engineered for your application
The F600 Pump Drive offers a host of dedicated features including dry-run prevention, pipe fill, pump cleaning, over-cycling protection and level switch control. A range of different control modes covering single pumps and also different parallel pump configurations make Control Techniques’ F600 a truly versatile solution.
|
|
Free 5 year warranty
To share our confidence in the reliability of Control Techniques, drives in the F600 range are eligible for Control Techniques’ extended warranty, at no extra cost.
It is a testament to our exceptional track record for reliability, giving you total peace of mind that your investment is protected and your site will continue to run uninterrupted.
Warranty terms and conditions
apply.
|
-
Variants
Maximum versatility, variants for every application
Unidrive DFS is available with a control stage to suit any application:
-
Industrial automation systems based upon induction or servo motors, where control dynamics are key. -
DFS supports the latest high-efficiency motors to maximize return on investment and minimize impact on the environment.
Select from:
Unidrive M600, M700, M701, M702 or Unidrive M702 control:
|
M600
High Performance Sensorless PM and IM Control.
-
Modbus RTU over RS485 communications
-
1 x STO certified to SIL3/PLe
-
Analog and digital I/O
-
Optional IM closed loop vector control
|
 |
M700
High Performance PM and IM Control
-
Multi-protocol Ethernet communications
-
1 x STO certified to SIL3/PLe
-
Analog and digital I/O
-
Advanced Motion Controller and optional Machine Controller
|
|
M701
High Performance PM and IM Control.
-
Modbus RTU over RS485 communications
-
1 x STO certified to SIL3/PLe
-
Analog and digital I/O
-
Advanced Motion Controller and optional Machine Controller
|
|
M702
High Performance PM and IM Control.
-
Multi-protocol Ethernet communications
-
2 x STO certified to SIL3/ PLe
-
Digital I/O onboard, analog I/O option available
-
Advanced Motion Controller and optional Machine Controller
|
-
Applications
Whatever your application, DFS is the perfect solution across industry:
|
Fans & pumps
-
Fan & pump macros, plus onboard logic functions
-
Water hammer control, and catch a spinning motor
-
On-board Fire Mode
-
Improved energy efficiency during low demand
|
|
Compressors
-
On board PLC & PID functionalities for advanced control without the cost and footprint of an external controller
-
Energy efficiency and optimal control for increased Coefficient of Performance (CoP)
|
|
General Automation
-
Maximum control for conveyors with S-ramp acceleration/deceleration profiling and RFC-A automated load control
-
Efficient control of mixer applications and up to 200% overload
-
Closed-loop control for cranes and hoists for precision accuracy
-
Reliability and control for crushers
-
Precision and repeatability for extruder applications thru high-dynamic speed response, while delivering best energy efficiency with permanent magnet motor control
-
High energy efficiency and torque control for tunneling and drilling applications and up to 200% overload
|
-
-
Options
| Enclosure rating |
NEMA1 (Totally Enclosed, Filtered)
NEMA12 (IP54) |
| Environmental |
35°C (95°F) Standard or 45°C (113°F) Ambient Temperature Rating
(Drive rating of 40°C (104°F) and 50°C (122°F) respectively)
Anti-condensation Heaters |
| Supply |
Molded Case Circuit Breaker (MCCB) 35 kA*
Molded Case Circuit Breaker 65 kA*
Molded Case Circuit Breaker 100 kA*
MCCB Shunt Trip 110 V
MCCB Under Voltage Trip 110 V
MCCB Auxiliary Contacts
Harmonic Filters
Input Contactor
Incomer Bay (DFS1 Only - Isolated MCCB & Fuses, supports top or bottom cable supply) |
| Door Controls |
Remote Mounted Keypad (Standard)
Start & Stop Pushbuttons
Running & Power-On Lamps
Fault/Reset Pushbutton & Lamp
Auto/Manual Selector Switch
Speed Potentiometer
Ethernet/110Vac Outlet
Emergency Stop (Standard or w/ relay)
Power / Energy Meter
180 degree hinged doors
Locks: Barrel Type (Standard), Key, or Padlockable
HMI |
| Motor |
dV/dt Protection
Brake Control
Motor Blower Starter |
| Enclosure Configuration Options |
MOV protection for use on un-earthed supplies
Remove internal EMC filter for use on un-earthed supplies
24 Vdc External Supply (maintains control of drive with isolator open)
Additional terminal rail for customer control connections
110Vac Control Interface (24 Vdc Standard)
Interior Lighting
4” Plinth-base (Standard), 8” Plinth-base (Optional)
Additional
Enclosure Bay with backplate (15.75”) |
| Freight & Packaging |
Expedited Shipping
Additional Crating Options |
-
-
Software & Support
Intuitive commissioning software
 |
Connect - Commissioning tool Based on Control Techniques’ 25 years' experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.
|
Advanced machine control
 |
Machine Control Studio - Programming tool Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Commander C’s new automation and motion control features.
|
Diagnostics Tool
 |
Diagnostic Tool Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques' drives to quickly solve any error codes that the drive may show.
|
Drive Setup
 |
Drive Setup Free access web pages provide ‘how-to’ videos, step by step guides and comprehensive technical manuals for your drive installation.
|
|
