digiVEC
- Fully digitized 3AC servo controller -

Main features
 

Tip

The new series digiSTAR is the improved successor of the digiVEC servo inverter.
The digiVEC is still available, but for new applications we recommend the digiSTAR.

Control structures available

• Speed control with/without resolver
• Torque control with/without resolver
• Frequency control
• Integration of higher level control
  structures, e.g. position control

Feedback systems
Two sensor inputs for

• Resolver, all makes
• Incremental encoders, all makes
• Sine encoders, with or without
  commutation track (Heidenhain,
  Stegmann, Tamagawa) is optional

Comprehensive test and diagnostic
functions

• Accessible at front side:
  -  8 LED for status display
  -  8 Measure points
• Extended functions via PC
  and Handling Software

• Fieldbus, e.g. CAN
• Serial interface RS232, RS485

Inputs and outputs

• 4 analogue reference inputs
• 6 analogue outputs
• 12 digital inputs
• 9 digital outputs

Special hardware features

• Integrated brake chopper
• Integrated brake resistor up to
  DAC 28 (Terminals for external
  high-power resistor are standard)
• Integrated mains filter (Option)
  and integrated output filter
  (Standard)
• Easy installation of signal, mains and
  motor cables using connector plugs
  (For cables > 16 A: Fixed terminals)
• Input for motor thermistor

Options

• Software for spindle positioning, indexing,
  winding at constant tension, electronic
  gearboxes, metering pistons with immediate
  reversing and many other applications
• Encoder simulation card for simulating a
  normal signal from a mechanical encoder,
  with the facility to set any full number of
  pulses up to max. 1,024 pulses per pair of
  poles in the resolver.
• Interface to CAN bus
• Supplementary card with 24 digital inputs or
  outputs (configurable) for applications
• Customer specific functions on request