0.33 hp – 200 hp (0.25 kW – 132 kW) Normal Duty
0.33 hp – 150 hp (0.25 kW – 110 kW) Heavy Duty
115 V | 208 - 240 V | 380 - 480 V | 575 V | 690 V

Simple set up. 3 steps to control

Setting up a drive can require training, specialist knowledge and time.

But Commander C will get you up and running, from out of the box to controlling your motor, in minutes.

Three simple steps will set up your drive for most fan, pump, compressor, conveyor and general purpose applications! 

 

 

• Specifications

  Control Mode

  Open loop vector or V / Hz induction motor control	✓
  Open loop Rotor Flux Control for induction motors (RFC-A)	✓

  Environment

  Ambient Operating Temperature	Size 1 - 4: -20°C to 40°C (-4°F to 104°F) @ 3 kHz switching freq. | Operation to 60°C (140°F) with de-rating Size 5 - 9: -20°C to 40°C (-4°F to 104°F) @ 3 kHz switching freq. | Operation to 55°C (131°F) with de-rating
  Cooling Method	Forced convection
  Humidity	95 % non-condensing at 40 °C (104 °F)
  Storage Temperature	Size 1 - 4: -40°C to 60°C (-40°F to 140°F) — 24 months Max. Size 5 - 9: -40°C to 55°C (-40°F to 131°F) — 24 months Max.
  Altitude	De-rate the continuous output current by 1% for every 100 m (328 ft) above 1000 m (3,280 ft) to a maximum of 3000 m (9,840 ft)
  Vibration	Tested in accordance with IEC 60068-2-64 and IEC 60068-2-6
  Mechanical Shock	Tested in accordance with IEC 60068-2-27 and IEC 60068-2-29
  Enclosure Rating	IP20, NEMA 1 conduit kits available
  Electromagnetic Capability	IEC/ EN 61800-3 Immunity and Emissions EN 61000-6-2: Immunity for industrial environments EN 61000-6-4: Emissions for industrial environmentsM/br> EN 61000-3-2: Harmonic current emissions An EMC data sheet is available on request
  RoHS	Complies with the Restriction of Hazardous Substances Directive (2011/65/EU)

  AC Supply Requirements

  Voltage	100 V models: 100 to 120 Vac ±10% 200 V models: 200 to 240 Vac ±10% 400 V models: 380 to 480 Vac ±10% 500 V models: 500 to 575 Vac ±10% 690 V models: 500 to 690 Vac ±10%
  Phase	1Ø and 3Ø (Model dependent)
  Maximum Supply Imbalance	2% negative phase sequence, 3% voltage imbalance between phases
  Input Frequency	45 to 66 Hz
  Input Displacement Power Factor	0.97

  Control

  Switching Frequency	Size 1 - 4: 0.667, 1, 2, 3, 4, 6, 8 12 & 16 kHz Size 5 - 9: 2, 3, 4, 6, 8 12 & 16 kHz
  Output Frequency Range	0 to 550 Hz
  Frequency Accuracy	±0.02% of full scale
  Frequency Resolution	0.01 Hz
  Analog Input Resolution	Voltage mode: 11 bits (unipolar) Current mode: 11 bits
  Braking	Dynamic braking transistor included, requires external resistor

  Protection

  DC Bus Undervoltage Trip	100 V models: 175 Vdc 200 V models: 175 Vdc 400 V models: 330 Vdc
  DC Bus Overvoltage Trip	Frame sizes 1 - 4: 100 V models: 510 Vdc 200 V models: 510 Vdc 400V models: 870 Vdc
  	Frame size 5 - 9: 200V models: 415 Vdc 400 V models: 830 Vdc
  Drive Overload Trip	Programmable: Default settings: 180% for 3s, 150% for 60s
  Instantaneous Overcurrent Trip	220% of rated motor current
  Phase Loss Trip	DC bus ripple threshold exceeded
  Over-temperature Trip	Drive heatsink temperature exceeds 95°C (203°F)
  Short Circuit Trip	Protects against output phase-to-phase fault
  Ground Fault Trip	Protects against output phase-to-ground fault
  Motor Thermal Trip	Electronically protects the motor from overheating due to loading conditions

  Approval & Listings

  UL, cUL	UL file NMMS/8: E171230
  CE	CE approval
  EU	These products comply with the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/EU) and the Electromagnetic Compatibility Directive, (2014/30/EU).
  RCM	RCM Registered supplier No. 12003815281
  ISO	Manufacturing facilities comply with ISO 9001:2015 and ISO 14001
  TÜV	C300 models only: The Safe Torque Off (STO) function may be used as a safety component of a machine. Type examination certificates by TÜV Rheinland: Frame sizes 1 - 4: No. 01/205/5383.03/18 Frame sizes 5 - 9: No. 01/205/5387.02/18 Functional safety parameters: EN ISO 13849-1 - Cat 4, PLe EN61800-5-2/EN62061/IEC 61508 - SIL 3 UL functional safety approval: FSPC E171230

   

   

   

   

   

   

• Applications

  Whatever your application, Commander C is the perfect solution across industries

  The Commander series are simple and compact AC motor speed controllers that meet advanced requirements in a wide range of applications. Their small footprint – among the smallest in their class – makes them ideal for machine builders and OEMs, where space is at a premium.

   

  	Pumping, Ventilating & Compressing Improved energy efficiency during periods of low demand On board PLC & PID functionalities make advanced control easy and efficient without the need of an external controller Skip Frequencies allow users to easily avoid equipment resonant frequencies, reducing high vibration levels Supply Loss Ride Through will keep the drive up and running through most power disturbances
  	Conveying Accurate remote speed control with fieldbus communications S-ramp acceleration / deceleration profiling provides smooth speed transitions minimizing machine jerk Avoids early wear and tear of the equipment Overload capacity up to 180%
  	Lifting, Hoisting & Winching Adjustable mechanical brake sequencing with torque proving function Embedded PLC functionality can manage local I/O reducing the need for an external controller
  	Access Control Smooth motion with enhanced open loop control Small physical size allows the drive to be mounted easily in smaller enclosures Highly reliable in harsh environments, providing long lasting service
  	Processing (Mixers, Kneaders, Crushers, Agitators, Centrifuges, Extruders) Ease of integration to external PLC or other management systems through networking options Conformal coating for enhanced environmental protection Overload capacity up to 180% Highly stable motor control

   

• Options

  Keypads

  	Remote Keypad RTC The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics.
  	Remote Keypad Remote mountable, intuitive plain text, multilingual LCD keypad for rapid set-up and superior diagnostics (using the AI-485 adaptor along with a comms lead). Rapid and secure panel fit with 1 x 32mm hole rated to IP66 (NEMA 4).

  

  System Integration Modules - Communications

  	SI-PROFIBUS SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features.
  	SI-DeviceNet SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality.
  	SI-CANopen Commander C's SI-CANopen interface module supports various profiles, offering optimum flexibility.
  	SI-Ethernet SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies.
  	SI-EtherCAT SI-EtherCAT allows Commander C general purpose drive to connect and interface with EtherCAT networks.
  	SI-PROFINET-V2 SI-PROFINET-V2 allows Commander C to communicate and interface with PROFINET PLCs and networks.
  	SI-Interbus Interbus interface modules.

  System Integration Modules - Additional I/O

  SI-I/O Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays.

  Optional Accessories

  	AI-Back-up Adaptor Port adaptor for SD card parameter cloning, and an input for 24 V back-up.
  	AI-Smart Adaptor Has a built-in memory for parameter cloning and an input for 24 V back-up.
  	AI-485 Adaptor Adaptor that allows the drive to communicate via RS485.
  	AI-485 24 V Adaptor Adaptor with 24 V input.
  	RS485 Cable The USB comms cable allows the drive to connect to a PC for use with Commander's PC tools.

• Software & Support

  Intuitive commissioning software

  Connect - Commissioning tool Based on Control Techniques’ 25 years' experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.

  Advanced machine control

  Machine Control Studio - Programming tool Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Commander C’s new automation and motion control features.

  Diagnostics Tool

  Diagnostic Tool Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques' drives to quickly solve any error codes that the drive may show.

  Drive Setup

  Drive Setup Free access web pages provide ‘how-to’ videos, step by step guides and comprehensive technical manuals for your drive installation.